Waring CB15 Instruction Manual - Page 14

Water Must Not Exceed 115° F 46° C,

Page 14 highlights

To Wash and Rinse Container: 1. REMOVE CONTAINER FROM MOTOR BASE. Remove lid. Rinse container interior and lid under running water. Add washing solution to container. Scrub and flush out the container interior and lid to dislodge and remove as much food residue as possible. Empty container. 2. Wipe down exterior of container with a soft cloth or sponge dampened with washing solution. Wash lid and lid insert in fresh washing solution. Fill container ¼ full with fresh washing solution, cover, place on motor base, and run on high speed for two (2) minutes. Empty container. 3. Repeat step (2) using clean rinse water in place of washing solution. To Wash and Rinse Spigot: NOTE: Spigot is to be handwashed only. 4. Remove spigot assembly from jar adaptor by rotating counterclockwise. Separate the lever from the rubber insert by pushing the ball tip out of the loop. Remove the rubber insert. 5. Wash spigot assembly and rubber insert in fresh washing solution. 6. Repeat step (5) using clean rinse water in place of the washing solution. Be sure all debris has been removed. NOTE - IMPORTANT IN ORDER TO MINIMIZE POSSIBILITY OF SCALDING, TEMPERATURE OF WASHING SOLUTION AND RINSE WATER MUST NOT EXCEED 115° F (46° C), AND QUANTITY USED MUST NOT EXCEED ¼ CONTAINERFUL. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50

14
To Wash and Rinse Container:
1. REMOVE CONTAINER FROM MOTOR BASE. Remove
lid. Rinse container interior and lid under running water.
Add washing solution to container. Scrub and flush out
the container interior and lid to dislodge and remove as
much food residue as possible. Empty container.
2. Wipe down exterior of container with a soft cloth or
sponge dampened with washing solution.
Wash lid and lid insert in fresh washing solution. Fill
container ¼ full with fresh washing solution, cover,
place on motor base, and run on high speed for two (2)
minutes. Empty container.
3. Repeat step (2) using clean rinse water in place of
washing solution.
To Wash and Rinse Spigot:
NOTE: Spigot is to be handwashed only.
4. Remove spigot assembly from jar adaptor by rotating
counterclockwise. Separate the lever from the rubber
insert by pushing the ball tip out of the loop. Remove the
rubber insert.
5. Wash spigot assembly and rubber insert in fresh
washing solution.
6. Repeat step (5) using clean rinse water in place of the
washing solution. Be sure all debris has been removed.
NOTE – IMPORTANT
IN ORDER TO MINIMIZE POSSIBILITY OF SCALDING,
TEMPERATURE OF WASHING SOLUTION AND RINSE
WATER MUST NOT EXCEED 115° F (46° C), AND
QUANTITY USED MUST NOT EXCEED ¼
CONTAINERFUL
.