Waring CB15 Instruction Manual - Page 9

Press the STANDBY - manual

Page 9 highlights

3. Put ingredients into container. Always add liquid ingredients first, unless otherwise specified in recipe. Do not fill above MAX line. Place cover securely on container and fasten the cover clamps. 4. Press the STANDBY button to turn on the blender. Press the UP arrow or DOWN arrow. The initial time will be 10 seconds. 5. Push the UP arrow to set the time required. The timer will advance only in 10-second intervals. Timer can be set to the maximum of 3 minutes. 6. Select and press a speed button; the blender will start and run for that selected time. It will count down in 1-second intervals and stop at 0. NOTE: If you want to increase or decrease time while timer is counting down, press UP or DOWN arrows. Timer will increase or decrease in 10-second intervals. After 5 seconds the timer will turn off and return to manual mode. 7. When using the timer again, the initial time will be the last time set. NOTE: If unit has been unplugged, the timer will default back to 10 seconds. 8. Always hold container with one hand when starting and while blending. Never operate without container lid properly clamped in place. 9.  Allow motor to come to a complete stop before removing container. Never place the container on the motor base or remove it from the motor base while the motor is running. 7.  Press the STANDBY button again to turn off the blender. 8.  Remove the container from the motor base and empty the contents. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50

9
3.
Put ingredients into container. Always add liquid
ingredients first, unless otherwise specified in recipe.
Do not fill above MAX line. Place cover securely on
container and fasten the cover clamps.
4.
Press the STANDBY button to turn on the blender.
Press the UP arrow or DOWN arrow. The initial time
will be 10 seconds.
5.
Push the UP arrow to set the time required. The timer
will advance only in 10-second intervals. Timer can be
set to the maximum of 3 minutes.
6.
Select and press a speed button; the blender will
start and run for that selected time. It will count
down in 1-second intervals and stop at 0.
NOTE:
If
you want to increase or decrease time while timer is
counting down, press UP or DOWN arrows. Timer will
increase or decrease in 10-second intervals. After
5 seconds the timer will turn off and return to manual
mode.
7.
When using the timer again, the initial time will be the
last time set.
NOTE:
If unit has been unplugged, the
timer will default back to 10 seconds.
8.
Always hold container with one hand when starting
and while blending. Never operate without container
lid properly clamped in place.
9.
Allow motor to come to a complete stop before
removing container. Never place the container on the
motor base or remove it from the motor base while
the motor is running.
7.
Press the STANDBY
button again to turn off the
blender.
8.
Remove the container from the motor base and
empty the contents.