Waring MBB1000 Instruction Booklet - Page 5
Grounding Instructions
View all Waring MBB1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
GROUNDING INSTRUCTIONS For your protection, Waring® blenders are equipped with a 3-conductor cord that has a molded 3-prong grounding-type plug, and should be used in combination with a properly connected grounding-type outlet as shown in Figure 1. If a grounding-type outlet is not available, an adapter, shown in Figure 2, may be obtained so that a 2-slot wall outlet can be used with a 3-prong plug. Referring to Figure 3, the adapter must be grounded by attaching its grounding lug under the screw of the outlet cover plate. CAUTION: Before using an adapter, it must be determined that the outlet cover plate screw is properly grounded. If in doubt, consult a licensed electrician. Never use an adapter unless you are sure it is properly grounded. Note: Use of an adapter is not permitted in Canada. This appliance is for 120 volts only and should not be used with a converter. IMPORTANT: Always unplug the Waring® blender from outlet when assembling and disassembling. 5