Waring MBB1000 Instruction Booklet - Page 9
Operating Instructions
View all Waring MBB1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
OPERATING INStRUCTIONS 1. When placing the container on the blender base, make sure that the unit is unplugged. Do not put the container on or take it off while the unit is running. Doing so may damage your blender. 2. Plug it into a convenient outlet. The LED lights will illuminate over the control panel when the unit has been properly plugged in. 3. Put ingredients into the container and place the cover on top. Do not fill over max fill line. NOTE: Do not use a container other than the one provided. 4. Depending on what you are blending, choose speed 1-10 or PULSE to blend ingredients to desired consistency. FOR CONTINUOUS BLENDING Turn the variable speed control knob clockwise to set the speed from 1 to 10 based on the ingredients you wish to blend. Press the START/STOP button to begin blending. The LED lights above the START/STOP button will begin flashing. When you have achieved the desired results, press the START/STOP button to stop. FOR PULSE BLENDING Press and hold the PULSE button until ingredients have achieved the desired results. The LED lights above the PULSE button will flash when the PULSE button is pressed. Allow blades to come to a complete stop before removing the container from the blender base. WARNING: Never place the container on the blender base or remove it from the blender base while the motor is running. 9