Waring WDM360 Instruction Manual - Page 3

If a grounding type outlet is not available, an adapter, shown in Figure 2, may be obtained to enable a 2-slot wall outlet to be used with a 3-prong plug. Referring to Figure 3, the adapter must be grounded by attaching its grounding lug under the screw of the outlet cover plate. CAUTION: Before using an adapter, it must be determined that the outlet cover plate screw is properly grounded. If in doubt, consult a licensed electrician. Never use an adapter unless you are sure it is properly grounded. NOTE: Use of an adapter is not permitted in Canada. HOW TO USE YOUR WARING® DRINK MIXER Your new Waring® Drink Mixer has an automatic ON/OFF switch (actuator), located behind the front tab of upper cup holder, that starts the motor when the mixing cup is placed in the proper position on the cup support. The cup support has two steps. To activate the automatic On/Off switch, the bottom of the mixing cup must be securely resting on the upper step of the cup support and the top rim of the mixing cup must go behind the front tab of upper cup holder. The motor will continue to operate while the mixing cup remains on the mixer, activating the actuator. Removal of the container will shut off the motor. The 3-speed switch on top of the Waring® Drink Mixer regulates the operating speed. Choose either LO (I), MED (II), or HI (III) speed. For mixing heavy drinks, use high speed only; for light drinks with more liquid, use low speed. 3