Waring WIH800 Instruction Manual - Page 5

OPERATION FRONT ON/OFF POWER/TEMP SELECT + + - - REAR POWER/TEMP SELECT ON/OFF NOTE: This Induction Range requires induction-ready cookware. If the pan is not induction ready, it will not register on the induction range. The LCD display will show a flashing "STANDBY" when attempting to select a heat mode without an induction-ready pan on the glass cooking surface. The unit will automatically shut off after 60 seconds of not having an induction-ready pot/pan. 1. Before turning on the power, make sure the cookware is on the ceramic glass cooking surface with ingredients inside. 2. To turn the power on, press the ON/OFF button and unit starts with POWER. Choose a cooking mode by pressing POWER/TEMP SELECT. Notice: When there is no suitable cookware or no cookware on the glass, the LCD display will show a flashing "STANDBY" and will sound with multiple audible beeps. 3. To select the proper POWER setting, press the "+" or "-" until the correct POWER setting is achieved (defaults = 1000W). LCD will show appropriate setting in watts. 4. To select temperature setting, press the POWER/TEMP SELECT button to transfer to TEMP (defaults to 180˚F). LCD display will show "Temp" to indicate temperature mode function and 180˚F. Press the "+" or "-" until the correct temperature setting is achieved. 5. After cooking is completed, press the ON/OFF button again to turn off the unit. 5