Waring WIH800 Instruction Manual - Page 8

TROUBLESHOOTING Error Code List on LCD Display Error Code Description of Error Solutions STANDBY blinking and audible beep There is no cookware or no suitable cookware on the range. The power will completely shut off within 60 seconds if there is no cookware or the wrong type of cookware on the unit. • Make sure your pot/pan is induction ready. • Check diameter of pot/pan; it must have a flat bottom between 4.75" and 10" in diameter. E1 Voltage is under 100V. E2 Voltage is over 275V. Check electrical specifications of power source. E3 The housing or interior parts may Contact the nearest be damaged or defective. authorized service facility for troubleshooting, repair and adjustment. E5 The temperature sensor Contact the nearest underneath the cooking area is authorized service facility for defective or there is a short circuit. troubleshooting, repair and The housing or interior parts may adjustment. be damaged or defective. E6 The thermal protection has shut the Unplug the unit and let cool for unit off due to overheating in the 20 minutes. Plug the unit back TEMP mode. in and continue use. If the range still does not function, contact the nearest authorized service facility for troubleshooting, repair and adjustment. E7 The temperature inside the unit is Unplug the unit and let cool for too hot. 20 minutes. Once the range has completely cooled, be sure it is positioned away from the wall and there are no obstructions to the airflow. Plug the unit back in and continue use. If it still doesn't work, parts may be damaged. Contact the nearest authorized service facility for troubleshooting, repair and adjustment. E9 Temperature sensor is defective. Change pot and restart the induction. Issue is caused by a concave pot. If there is no issue with the pot, restart the unit. If the error code still shows, please contact the nearest authorized service facility for trouble shooting, repair and adjustment. 8