Waring WSM20L Instruction Manual - Page 8
Warning, Operating Instructions
![]() |
View all Waring WSM20L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
5. Use at least two other people to tilt the unit and install rubber feet. 6. Inspect mixer to make sure all parts have been provided (i.e., bowl, paddle, whisk, and dough hook). 7. Read the electrical information found on the data plate located at the rear of the machine. The incoming power must match the rating on the data plate. WARNING OPERATING INSTRUCTIONS TO AVOID SERIOUS PERSONAL INJURY: • Before use clean the mixer. Refer to Cleaning Instructions section of this manual. • NOTE: It is normal for the factory to apply a generous amount of grease in and on the machine. Excess grease (brown in color) will be on all metal surfaces (e.g., top portion of bowl guard, speed control, bowl clamps, bowl-lift lever, and attachment hub thumbscrew). Excess high-pressured grease (brownish-black) can also be found on the planetary shaft, and some drippings can be found in the bowl. • DO NOT operate mixer before reading the instruction manual first. • ALWAYS disconnect or unplug electric power before cleaning, servicing, or adjusting parts or attachments. • ALWAYS keep hands, hair and clothing away from moving parts. • Turn off mixer before changing speeds. • Follow the Capacity Chart for mixing dough. Refer to Capacity Chart section. • Use only first (1) speed for mixing dough. 2nd speed must never be used on 50% AR or lower. • If the unit shuts off during mixing (overload protection trips), reduce the batch size. 8
![](/manual_guide/products/waring-wsm20l-instruction-manual-de90247/8.png)