Waring WSV25 Instruction Manual - Page 13

CLEANING AND MAINTENANCE 1. Do not leave water in vessel after use. Always drain vessel thoroughly after every use, using the drain hose and drain lever to open and close the release valve. 2. Always keep the water intake filter clean; use brush to clean before and after each use. 3. Do not put anything into the vessel except clean tap water. 4. In the event of a bag breaking in the vessel or something being mixed into the water, you will need to clean the vessel. Do not drain the water through the drain hose in this case. Lift the vessel to remove it from the housing and pour everything out. Use a soft cloth or sponge and mild, soapy water to wipe away any residue or items from the vessel. 5. Never immerse the machine unit in water or other liquids for cleaning or rinsing. 6. Never use abrasives or harsh chemicals to clean your unit. 7. Never put the unit in the dishwasher. 8. It is suggested that you periodically run a cleaning cycle on your unit. Fill the vessel with clean water to above the MIN fill line. Add mild, soapy detergent (add a non-foam detergent or acidic cleaning liquid into the water). Set temperature at 40°C/104°F and run the machine for 20 minutes. Drain all water from the vessel. You may need to run this cycle twice to make sure that the interior system of the machine is clean and clear. Fill with clean water and drain twice, using the drain hose, to ensure all soap has been flushed out. NOTE: Any other servicing should be performed by an authorized service representative. TROUBLESHOOTING Unit is not operating 1. Check power cord to see if it is firmly plugged into electrical outlet. 2. Examine power cord for any damage. 3. See if electrical outlet is operating by plugging in another appliance. 4. Check if the POWER button is lit. If it is not, ensure you have pressed this POWER button for more than 2 seconds. 13