Waring WSV25 Instruction Manual - Page 8

Operating, Instructions, To Set The Machine For Use

Get Waring WSV25 PDF manuals and user guides View all Waring WSV25 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

OPERATING INSTRUCTIONS NOTE: Buttons are capacitive touch and only require a light tap with your finger to operate. 5 4 3 2 1 11 10 9 8 7 6 Control Panel: 1. Power Button ( ): Touch and hold for 2 seconds to switch the unit on or off. 2. M emory Button: Select memory to program memory stations M1-M5. 3. LED Memory Stations M1-M5 4. Save Button: Saves user programmed settings. 5. Water Temperature Indicator (Cº or Fº) 6. Start Button ( ): Starts water circulator. 7. TEMP Button: The temperature set range is between 35°C/95°F and 90°C/194°F. Default temperature is: 60°C/140°F. 8-9. (+/-) Buttons: Increases/decreases time or temp. For fast scroll, press and hold (+/-) buttons. 10. TIMER (SET/START/OFF) Button: Set time from 00:00- 99:00. Default time is 02:00. Hold timer button for 4 seconds to turn timer off, machine will remain on until manually shut off. Press timer again to default back to 02:00 minutes or to reset time, use +/- arrows. 11. Time Indicator TO SET THE MACHINE FOR USE 1. Be sure the vessel contains water before starting the unit. The water must be over the minimum level (MIN) which is marked on the side wall of the vessel. The unit will not start if water level is below the MIN line and will show error code E001. 2. Plug the cord set into an electrical outlet. 3. H old the Power button ( ) for 2 seconds to turn the machine 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
8
OPERATING
INSTRUCTIONS
Control Panel:
1.
Power Button
(
):
Touch and hold for 2 seconds to switch
the unit on or off.
2.
Memory Button:
Select memory to program memory stations
M1–M5.
3.
LED Memory Stations M1–M5
4.
Save Button:
Saves user programmed settings.
5.
Water Temperature Indicator
(Cº or Fº)
6.
Start Button (
):
Starts water circulator.
7.
TEMP Button:
The temperature set range is between
35°C/95°F and 90°C/194°F. Default temperature is: 60°C/140°F.
8–9.
(+/-) Buttons:
Increases/decreases time or temp. For fast
scroll, press and hold (+/-) buttons.
10.
TIMER (SET/START/OFF) Button:
Set time from 00:00–
99:00. Default time is 02:00. Hold timer button for 4 seconds
to turn timer off, machine will remain on until manually shut off.
Press timer again to default back to 02:00 minutes or to reset
time, use +/- arrows.
11.
Time Indicator
TO SET THE MACHINE FOR USE
1.
Be sure the vessel contains water before starting the unit. The
water must be over the minimum level (MIN) which is marked on
the side wall of the vessel. The unit will not start if water level is
below the MIN line and will show error code E001.
2.
Plug the cord set into an electrical outlet.
3.
Hold the Power button (
) for 2 seconds to turn the machine
NOTE:
Buttons are capacitive touch and only
require a light tap with your finger to operate.
11
10
9
8
7
6
1
2
3
4
5