Waring WSV25 Instruction Manual - Page 9

the M1 memory station will illuminate. Tap TEMP button to set

Get Waring WSV25 PDF manuals and user guides View all Waring WSV25 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

on. You should hear a "click" tone. The display will show the current temperature of the water in the vessel. 4. To set the cooking temperature: 4.1 T ap the TEMP button once. The screen shows the default temperature of 60°C/140°F and will flash. 4.2 To switch between Fahrenheit and Celsius temperature settings, press and hold TEMP button for 4 seconds. Displayed temperature will flash, then tap again to switch setting. Repeat steps to switch back to Fahrenheit. 4.3 Use the (+/-) buttons to change the cooking temperature to the desired setting. Press and hold (+/-) buttons for fast scroll. The temperature set range is: 35°-95°C/90°-194°F. 5. To set the cooking time: 5.1 Tap the TIMER button. LED displays the time and flashes. The default time of 02:00 should appear. Use the (+/-) buttons to increase /decrease time. Time-set range is 00:00-99:00 hours. Press and hold (+/-) buttons for fast scroll. 5.2 Five seconds after desired time is selected, the display will return to display water temperature. 6. To set memory stations: First ensure the vessel has been filled with water over the MIN level marking indicated on the inside wall of the vessel. The unit will not start if water is below MIN line and the display will show an error code of E001. Be sure to have followed all instructions on "To Set the Machine for Use" prior to setting MEMORY.  To set a memory station, power unit on; the display will show current water temperature and 2:00 time. Press MEMORY and the M1 memory station will illuminate. Tap TEMP button to set desired water temperature. Temperature will display flashing. Use the +/- buttons to adjust. Next tap the TIMER button to set desired runtime. Time will display flashing. Use the +/- buttons to adjust and press SAVE. Memory M1 has been programmed and will remain set for future use. To set additional memory stations, tap MEMORY and follow the above steps. 7. To start cooking: 7.1 W hen you have set the desired cooking time and temperature, tap the button to begin heating the water to set temperature. Or using the MEMORY button, choose the corresponding memory M1-M5, then touch the button to begin heating the water to the preset temperature. An audible tone will alert as the vessel begins to heat. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
9
on. You should hear a “click” tone. The display will show the
current temperature of the water in the vessel.
4.
To set the cooking temperature:
4.1 Tap the TEMP button once. The screen shows the default
temperature of 60°C/140°F and will flash.
4.2 To switch between Fahrenheit and Celsius temperature
settings, press and hold TEMP button for 4 seconds.
Displayed temperature will flash, then tap again to switch
setting. Repeat steps to switch back to Fahrenheit.
4.3 Use the (+/-) buttons to change the cooking temperature
to the desired setting. Press and hold (+/-) buttons for fast
scroll. The temperature set range is: 35°–95°C/90°–194°F.
5.
To set the cooking time:
5.1 Tap the TIMER button. LED displays the time and flashes.
The default time of 02:00 should appear. Use the (+/-)
buttons to increase /decrease time. Time-set range is
00:00–99:00 hours. Press and hold (+/-) buttons for fast
scroll.
5.2 Five seconds after desired time is selected, the display will
return to display water temperature.
6.
To set memory stations:
First ensure the vessel has been filled with water over the MIN
level marking indicated on the inside wall of the vessel. The unit
will not start if water is below MIN line and the display will show
an error code of E001. Be sure to have followed all instructions
on “To Set the Machine for Use” prior to setting MEMORY.
To set a memory station, power unit on; the display will show
current water temperature and 2:00 time. Press MEMORY and
the M1 memory station will illuminate. Tap TEMP button to set
desired water temperature. Temperature will display flashing.
Use the +/- buttons to adjust. Next tap the TIMER button to set
desired runtime. Time will display flashing. Use the +/- buttons
to adjust and press SAVE. Memory M1 has been programmed
and will remain set for future use. To set additional memory
stations, tap MEMORY and follow the above steps.
7.
To start cooking:
7.1 When you have set the desired cooking time and
temperature, tap the
button to begin heating the water to
set temperature. Or using the MEMORY button, choose the
corresponding memory M1–M5, then touch the
button
to begin heating the water to the preset temperature. An
audible tone will alert as the vessel begins to heat.