Waring WWB10G Instruction Manual - Page 7
Digital Display & Controls, Unpacking & Installation, Installation
View all Waring WWB10G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
DIGITAL DISPLAY & CONTROLS Standby - turns power on and off to the controls. Temp/Time - Press to set the temperature. Press and hold to set time. Arrows - use to adjust settings. Auto Fill/Manual - toggles between auto fill/plumbed in and manual fill/pour-over. Start - press to start the heater. Night Mode - Press to activate night mode. DIGITAL DISPLAY ICONS Lightbulb - Press to illuminate the display. AUTO FILL MANUAL FILL NIGHT MODE HEATING UNPACKING & INSTALLATION CAUTION: This is a heavy piece of equipment. It is recommended that moving or lifting the unit be done by two people to avoid injury. Carefully unpack the machine and make sure there was no damage during shipping. Contact customer service if you notice any issues. NOTE: The person installing the appliance is responsible for ensuring that electric and water connections meet the requirements of the national electric code, national plumbing code, and any local ordinances. INSTALLATION 1. Find a location near a water connection if the machine will be plumbed in. 2. Remove the hot water dispenser from the packing material. The overflow tray and four legs are packed separately. 3. Install legs by laying hot water dispenser on its side and screwing legs into leg supports until tight. 4. Carefully stand up the hot water dispenser and place it on a flat, 7