Weider 1120 English Manual - Page 7

Attach the Seat Frame 6 to the Front Leg 7 - weight

Get Weider 1120 PDF manuals and user guides View all Weider 1120 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

3. Attach the Front Leg (7) to the Base (1) with the 3 two M8 x 63mm Carriage Bolts (87) and two M8 Nylon Locknuts (58). Do not tighten the Locknut yet. Attach the Leg Bumper (60) to the Front Leg (7) with an M4 x 20mm Self-tapping Screw (69) and an M4 Washer (33). Make sure the end of the Bumper is pointing up. Up 33 60 69 58 7 58 1 87 4. Attach the Seat Frame (6) to the Upright (3) with two M8 x 65mm Bolts (68), two M8 Washers (59), and two M8 Nylon Locknuts (58). Do not tighten the Locknuts yet. Attach the Seat Frame (6) to the Front Leg (7) in the same manner. 4 68 68 6 59 58 59 68 68 7 3 59 58 58 59 5. Slide the two Weight Bumpers (27) onto the 5 Weight Guides (21). Orient the six Weights (22) with the pin holes on the bottom as shown. Slide the Weights onto the Weight Guides. Insert the Weight Tube Bumper (23) into the Weight Tube (24). Insert the Weight Tube into the six Weights (22). Make sure the pin on the Weight Tube is oriented as shown. Lubricate the indicated holes in the Top Weight (25) with the included grease packet. Slide the Top Weight onto the Weight Guides (21). 21 25 Pin Hole 21 Grease Pin 24 23 22 27 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
7
3.
Attach the Front Leg (7) to the Base (1) with the
two M8 x 63mm Carriage Bolts (87) and two M8
Nylon Locknuts (58).
Do not tighten the
Locknut yet.
Attach the Leg Bumper (60) to the Front Leg (7)
with an M4 x 20mm Self-tapping Screw (69) and
an M4 Washer (33).
Make sure the end of the
Bumper is pointing up.
4.
Attach the Seat Frame (6) to the Upright (3) with
two M8 x 65mm Bolts (68), two M8 Washers (59),
and two M8 Nylon Locknuts (58).
Do not tighten
the Locknuts yet.
Attach the Seat Frame (6) to the Front Leg (7)
in the same manner.
5.
Slide the two Weight Bumpers (27) onto the
Weight Guides (21). Orient the six Weights (22)
with the pin holes on the bottom as shown. Slide
the Weights onto the Weight Guides.
Insert the Weight Tube Bumper (23) into the
Weight Tube (24). Insert the Weight Tube into the
six Weights (22).
Make sure the pin on the
Weight Tube is oriented as shown.
Lubricate the indicated holes in the Top Weight
(25) with the included grease packet. Slide the
Top Weight onto the Weight Guides (21).
3
4
87
58
58
69
33
Up
60
7
1
6
68
68
68
59
59
59
59
3
7
58
58
58
68
5
25
21
21
22
27
23
24
Pin
Pin
Hole
Grease