Weider 146 English Manual - Page 7
tighten the Nylon Locknuts; the Barbell Hooks
View all Weider 146 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. Attach the Frame (2) to the Crossbar (3) with two M8 3 x 55mm Bolts (27) and two M8 Nylon Locknuts (33). Tighten the Nylon Locknuts (23 and 33) and the Bolts (23) used in steps 1Ð3 now. 27 2 3 33 4. Attach a Dip Handle (24) to one of the Weight Rests 27 (19) with an M8 x 60mm Bolt (37), an 11mm x 10.5mm Spacer (38), two M8 Washers (20) and an M8 Nylon Locknut (33). Slide a Handgrip (12) onto 4 the Dip Handle. Press a 25.4mm Round Inner Cap 12 (17) into the end of the Dip Handle. 33 20 24 Attach the other Dip Handle (24) to the other Weight Rest (19) in the same manner. 33 28 20 Attach the Left Barbell Hook (28) to the Weight Rest (19) with an M8 Washer (20) and an M8 Nylon 17 30 Locknut (33). The Barbell Hook must be oriented 19 19 as shown. Attach the Right Barbell Hook (30) to the other Weight Rest (19) in the same manner. Do not tighten the Nylon Locknuts; the Barbell Hooks 38 20 37 must be easy to turn. 5. Press a 50mm Square Bushing (18) onto each Upright (1, 16) and tap them in place with a rubber mallet. Slide a Weight Rest (19) into the Left Upright (1). Align one of the adjustment holes in the Weight Rest with the adjustment hole in the Upright. Tighten the Large Threaded Knob (32) into the adjustment hole in the Upright. Attach the other Weight Rest (19) to the Right Upright (16) in the same manner. 5 18 32 1 19 19 18 16 32 6. Tap a 38mm Square Inner Cap (15) into each end of 6 the Leg Lever (4). Tap a 25.4mm Round Inner Cap (17) into each end of the weight tube (B). 4 15 17 B 17 15 7