Weider 214 Bench Uk Manual - Page 5
Assembly - benches
View all Weider 214 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ASSEMBLY Make Things Easier for Yourself This manual is designed to ensure that the weight bench can be assembled successfully by anyone. Most people find that by setting aside plenty of time, assembly will go smoothly. Before beginning assembly, carefully read the following information and instructions: • Assembly requires two people. • For help identifying small parts, refer to the PART IDENTIFICATION CHART. • Tighten all parts as you assemble them, unless instructed to do otherwise. • As you assemble the weight bench, make sure all parts are oriented as shown in the drawings. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. The following tools (not included) are required for assembly: • Two adjustable spanners • One rubber mallet • One standard screwdriver • One Phillips screwdriver • Lubricant, such as grease or petroleum jelly, and soapy water. Assembly will be more convenient if you have a socket set, a set of open-end or closed-end spanners, or a set of ratchet spanners. 1. Before assembling the weight bench, make 1 sure that you have read and understand the information in the box above. Tap two 38mm Square Inner Caps (16) into the bottom of each Upright (1). Attach the Crossbar (3) to the two Uprights (1) with four M8 x 55mm Bolts (14), four M8 Washers (12), and four M8 Nylon Locknuts (13). Do not tighten the Locknuts yet. 2. Tap three 30mm Square Inner Caps (17) into the 2 Front Leg (8) and the Stabiliser (31). Attach the Front Leg (8) to the Stabiliser (31) with two M8 x 40mm Carriage Bolts (29) and two M8 Nylon Locknuts (13). Note: The indents around the holes on one side of the Stabiliser must be on the bottom. Do not tighten the Locknuts yet. 5 12 13 12 1 3 14 16 16 17 1 12 13 16 13 17 Indents 29 8 13 31 17