Weider 214 Bench Uk Manual - Page 6

3. Attach the Front Leg (8) to the Frame (2) with two M8 x 40mm Carriage Bolts (29), two M8 Washers 3 (12), and two M8 Nylon Locknuts (13). Do not tighten the Locknuts yet. 29 2 12 12 13 8 4. Lubricate an M10 x 55mm Bolt (30) with grease. 4 Attach the Frame (2) to the upper set of holes in the bracket on the Crossbar (3) with the Bolt and an M10 Nylon Locknut (25). Do not overtighten the Locknut; the Frame must be able to pivot easi- ly. 23 30 3 Tighten the Adjustment Knob (23) into the Crossbar (3) and the Frame (2). Lubricate 25 2 5. Tap two 30mm Square Inner Caps (17) into the ends of the Leg Lever (4). Tap a 25mm Round Inner Cap (19) into the indicated end of the weight tube on the Leg Lever (4). Tap the 25mm Round Angled Cap (15) onto the other end of the weight tube. 6. Lubricate the M10 x 63mm Bolt (24) with grease. Attach the Leg Lever (4) to the bracket on the Front Leg (8) with the Bolt and an M10 Nylon Locknut (25). Do not overtighten the Locknut; the Leg Lever must be able to pivot easily. 5 17 4 15 19 Weight Tube 17 6 24 Lubricate 4 25 8 6