Weider 8512 English Manual - Page 12
Frame
View all Weider 8512 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
21. Route the Short Cable (58) around the 3 1/2" Pulley (15) attached to the lower hole in the Front Upright (42). See the inset drawing. Be sure that the Cable Trap (66) is turned to hold the Cable in place and that the Cable is routed around the Pulley as shown. Tighten the 3/8" Nylon Locknut (21) and the 3/8" x 3 3/4" Bolt (71). 22. Route the Short Cable (58) around the 3 1/2" Pulley (15) attached to the upper hole in the 22 Press Frame (17). Be sure that the Cable Trap (66) is turned to hold the Cable in place and that the Cable is routed around the Pulley as shown. Tighten the 3/8" Nylon Locknut (21) and the 3/8" x 3 1/2" Bolt (not shown). 42 15 71 66 58 Inset shows view from other side 58 15 66 21 17 23. Route the Short Cable (58) around the 3 1/2" Pulley (15) attached to the upper hole in the 23 58 Front Upright (42). See the inset drawing. Be sure that the Cable Trap (66) is turned to hold the Cable in place and that the Cable is routed around the Pulley as 42 15 shown. Tighten the 3/8" Nylon Locknut (21) 21 and the 3/8" x 3 3/4" Bolt (71). 42 15 71 66 58 Inset shows view . from other side. 12