Weider 8512 English Manual - Page 14
overtighten
![]() |
View all Weider 8512 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
26. Attach the Backrest (41) to the Front Upright 26 (42) with two 1/4" x 2 1/2" Screws (43) and two 1/4" Rat Washers (10). 42 41 43 10 27. Press a 1 1/2" Square Inner Cap (32) into the Seat Frame (36). Insert the 1/4" x 2" Carriage Bolt (38) into the center hole in the Seat Plate (37). Attach the 27 Seat Plate to the Seat (13) with two 1/4" x 1/2" Screws (18). Insert the 1/4" x 2" Carriage Bolt (38) into the indicated hole in the Seat Frame (36). Tighten a 1/4" Nylon Locknut (2) with a 1/4" Flat Washer (10) onto the Carriage Bolt. Attach the other end of the Seat (13) to the Seat Frame (36) with a 1/4" Flat Washer (10) and the 1/4" x 2" Screw (24). 28. Press a 1 1/2" Square Inner Cap (32) into the 28 Leg Lever (29). Lubricate the 5/16" x 2 1/4" Bolt (33). Attach the Leg Lever (29) to the Seat Frame (36) with the 5/16" x 2 1/4" Bolt and a 5/16" Nylon Locknut (3). Do not overtighten the Nylon Locknut. The Leg Lever must be able to pivot freely. Insert the 5/16" x 2" Eyebolt (35) into the Leg Lever (29) from the direction shown. Tighten a 5/16" Nylon Locknut (3) with a 5/16" Flat Washer (8) onto the Eyebolt. 13 38 37 36 24--1 O,--32 18 36 2 Lubricate-33 s 35- 32 3 29 8
![](/manual_guide/products/weider-8512-english-manual-4a322ca/14.png)