Weider 8515 User Manual - Page 12
pletely
View all Weider 8515 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
22. Attach the Long Cable (23) to the Small "U"- 22 Bracket (67) with a 1/4" Nylon Locknut (2) and a 1/4" Flat Washer (10). Do not com- pletely tighten the Nylon Locknut. It should be threaded onto the end of the Cable only a couple of turns. Attach the Small "U"-Bracket (67) to the Weight Tube (63) with the 5/16" x 1 3/4" Bolt (72) and a 5/16" Nylon Locknut (3). 3 10 2 23 72 67 63 0 23. Attach the Backrest (41) to the Front Upright (42) with two 1/4" x 2 1/2" Screws (43) and 23 two 1/4" Flat Washers (10). IP' 42 41 43 10 4. Press a 1 1/2" Square Inner Cap (32) into the Seat Frame (36). 24 Insert the 1/4" x 2" Carriage Bolt (38) through the center hole in the Seat Plate (37). Attach the Seat Plate to the Seat (13) with two 1/4" x 1/2" Screws (18). Insert the 1/4" x 2" Carriage Bolt (38) through the indicated hole in the Seat Frame (36). Tighten a 1/4" Nylon Locknut (2) with a 1/4" Flat Washer (10) onto the Carriage Bolt. Attach the other end of the Seat (13) to the Seat Frame (36) with a 1/4" Flat Washer (10) and the 1/4" x 2" Screw (24). 12 13 38 37 32 36 18 24) 10 2