Weider 8950 Uk Manual - Page 7
Slide the Top Weight 14 onto the Weight Guides
View all Weider 8950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
4. Slide the eight Weights (15) onto the Weight 4 Guides (10), with the slot for the Weight Pin (not shown) on the bottom and on the side away from the Upright (3). Insert the Weight Tube Bumper (13) into the bottom of the Weight Tube (12). Insert the Weight Tube into the Weights (15). Slide the Top Weight (14) onto the Weight Guides (10). 10 14 12 3 13 15 5. Press a 50mm Square Inner Cap (26) into the 5 Top Frame (4). Attach the Top Frame (4) to the Upright (3) with two M8 x 68mm Bolts (63) and two M8 Nylon Locknuts (69). Do not tighten the Locknuts yet. Attach the Top Frame (4) between the Weight Guides (10) with an M10 x 155mm Bolt (62), two M10 Washers (70), and an M10 Nylon Locknut (68). Tighten the Nylon Locknuts (68, 69) used in steps 2 and 5. 6. Press a 45mm Square Inner Cap (24) into the 6 end of the Seat Frame (8). Attach the Seat Frame (8) to the Upright (3) with two M10 x 70mm Bolts (57) and two M10 Nylon Locknuts (68). 62 4 63 3 26 10 70 70 68 69 3 57 8 68 24 7