Weider Club 500 English Manual - Page 12

20. Route the Cable (79) up through the Lat Tower 20 (48) and around an 89mm Pulley (65). Attach the Pulley inside of the Lat Tower with an M10 x 75mm Bolt (30), two M10 Washers (74), two Long Spacers (67), and an M10 Nylon Locknut (32). Make sure the large ball on the Cable is in the indicated position. 21. Wrap the Cable (79) around an 89mm Pulley 21 (65). Attach the Pulley and a Cable Trap (64) to the bracket on the Lat Tower (48) with an M10 x 75mm Bolt (30). Make sure the Cable Trap is inside the bracket and oriented to hold the Cable in the groove of the Pulley. Note: Do not put an M10 Nylon Locknut (not shown) on the M10 x 75mm Bolt (30) yet. 22. Wrap the Cable (79) around an 89mm Pulley 22 (65). Attach the Pulley and a Cable Trap (64) to the Weight Carriage (50) with an M10 x 45mm Bolt (27) and an M10 Nylon Locknut (32). Make sure the Cable Trap is outside the bracket and oriented to hold the Cable in the groove of the Pulley. 74 67 32 79 65 48 74 67 30 Large Ball 65 79 64 30 48 32 79 65 64 50 27 23. Wrap the Cable (79) around an 89mm Pulley 23 (65). Attach the Pulley and a Cable Trap (64) to the bracket on the Lat Tower (48) with the M10 x 75mm Bolt (30) used in step 21 and an M10 Nylon Locknut (32). Make sure the Cable Trap is oriented to hold the Cable in the groove of the Pulley. 12 64 32 48 65 79 30