Weider Core 600 Bench English Manual - Page 10

12. Attach a Connector (28) to the Left Upright (11) 12 with two M5 x 19mm Screws (52), two M10 x 90mm Bolts (45), and two M10 Washers (55). Do not tighten the Screws yet. Attach the other Connector (28) to the Right Upright (10) in the same way. 10 28 28 52 11 55 45 13. Note: If you have Olympic weights, use the 13 longer Olympic Extension (8) for this step; if you have standard weights, use the shorter Standard Extension (7). Attach the Olympic Extension (8) or the Standard Extension (7) to the Connector (28) on the Left Upright (11) with three M10 x 90mm Bolts (45), four M10 Washers (55), and three M10 Nylon Locknuts (42). Attach the Olympic Extension (8) or the Standard Extension (7) to the other Connector (28) in the same way. See step 12. Tighten the M5 x 19mm Screws (52). 28 45 8 55 55 42 45 42 28 7 11 14. Set a Safety Spotter (13) on a set of pegs on the Left Upright (11). Set the other Safety 14 Spotter (13) on a set of pegs on the Right 10 Upright (10). Make sure that both Safety Spotters are at the same height. 13 13 11 15. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in ADJUSTMENT, beginning on the following page. 10