Weider Pro 235 Bench English Manual - Page 8
Attach the Leg Lever 3 to the Front Leg 2
View all Weider Pro 235 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
5. Attach the Weight Tube (16) to the Leg Lever (3) with an M8 x 58mm Bolt (42), two M8 Washers (47), a 10mm Spacer (30), and an M8 Nylon Locknut (29). Press a 25mm Round Angled Cap (34) onto the end of the Weight Tube. Lubricate an M10 x 72mm Bolt (31) with grease. Attach the Leg Lever (3) to the Front Leg (2) with the Bolt and an M10 Nylon Locknut (48). Do not overtighten the Locknut; the Leg Lever must be able to pivot easily. 5 48 3 30 29 47 2 34 47 16 42 31 Lubricate 6. Attach the Backrest Tubes (12) to the Backrest Bracket (10) with four M8 x 43mm Bolts (27), four 6 M8 Washers (47), and four M8 Nylon Locknuts (29). Do not tighten the Locknuts yet. 27 47 12 47 47 47 27 29 29 10 7. Insert the Backrest Bracket (10) into the slot in 7 the Bench Frame (1). Lubricate an M10 x 172mm Bolt (41) with grease. Attach the Backrest Tubes (12) to the Bench Frame (1) with the Bolt and an M10 Nylon Locknut 12 (48). Do not overtighten the Locknut; the Backrest Tubes must be able to pivot easily. 48 Lubricate 41 1 10 8