Weider Pro 318 English Manual - Page 12
cf.&
![]() |
View all Weider Pro 318 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
16. Insert a 1 3/4" Square Inner Cap (19) into the top end of the Lat Tower (1). Wrap the free end of the Cable (36) around a Pulley (35). Attach the Pulley to the top end of the Lat Tower (1) with a 3/8" x 3 1/2" Bolt (50), a 3/8" Washer (51) and a 3/8" Nylon Locknut (28). Make sure the Cable is between the Pulley and the welded pin on the Lat Tower. Wrap the Cable (36) around the other Pulley (35). Attach the Pulley to the Lat Tower (1) with a 3/8" x 3 1/2" Bolt (50), a Cable Trap (52), a 3/8" Washer (51) and a 3/8" Nylon Locknut (28). Make sure the Cable Trap (52) is oriented as shown and that the Cable (36) runs smoothly over both Pulleys (35). 16 50 Pin 50 52 -cf.& 35 36 35 19 28 51 51 1 17. Insert the Lat Tower (1) into the Front Leg (4). The Lat Tower must be turned as shown. Secure the 17 Lat Tower with the Adjustment Knob (26). 26 4 12
![](/manual_guide/products/weider-pro-318-english-manual-a5f4a32/12.png)