Weider Pro 525 English Manual - Page 5
Part Identification Chart
View all Weider Pro 525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
PART IDENTIFICATION CHART Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 18 of this manual. Note: Some small parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached. M10 x 45mm Bolt (18) M10 Washer (15) M10 x 20mm Bolt (21) M8 Nylon Locknut (28) M10 Nylon Locknut (20) M10 x 80mm Bolt (22) M8 x 70mm Bolt (25) M10 x 65mm Bolt (19) 5
5
M10 x 80mm Bolt (22)
M10 x 20mm Bolt (21)
M10 x 65mm Bolt (19)
M10 x 45mm Bolt (18)
M8 x 70mm Bolt (25)
M10 Nylon Locknut (20)
M8 Nylon Locknut (28)
M10 Washer (15)
Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST on page 18 of this manual.
Note: Some small parts
may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.
PART IDENTIFICATION CHART