Weider Pro 635 English Manual - Page 10

14. Attach the Seat (35) to the Seat Frame (44) with two M6 x 16mm Screws (9), an M6 Washer (17), and the M6 x 50mm Bolt (7). 14 35 44 17 7 9 15. Attach the Backrest (36) to the Backrest Brackets (38) with four M6 x 50mm Screws (10). 15 36 10 38 10 16. Press a 50mm Square Inner Cap (21) into each end of the Leg Lever (28). Press a 25mm Round Inner 16 Cap (23) into the Leg Lever. Press an Angled Round Cap (29) onto the Leg Lever. 44 12 Lubricate the M10 x 78mm Bolt (5). Attach the Leg Lever (28) to the Seat Frame (44) with the Bolt and an M10 Nylon Locknut (12). 5 Lubricate 28 21 17. Tap 19mm Round Inner Caps (24) into each end of the three Pad Tubes (37). Insert a Pad Tube (37) through the indicated hole in the Leg Lever (28). Insert another Pad Tube through the other hole in the Leg Lever. Insert the remaining Pad Tube through the holes in the Seat Frame (44). Slide two Foam Pads (26) onto each Pad Tube (37). 17 26 29 21 23 37 44 26 28 37 26 37 24 26 10