Weider Pro 635 English Manual - Page 6

Attach a Front Upright 43 to a Weight Upright 42

Get Weider Pro 635 PDF manuals and user guides View all Weider Pro 635 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

3. Press a 50mm Square Inner Cap (21) into each Front Upright (43). Attach a Front Upright (43) to a Weight Upright (42) with two M8 x 68mm Bolts (1), four M8 Washers (15), and two M8 Nylon Locknuts (11). Do not tighten the Nylon Locknuts yet. Attach the other Front Upright (43) to the other Weight Upright (42) in the same manner. Attach the Front Upright (43) to the Left Base (53) with an M8 x 68mm Bolt (1), an M8 Washer (15), and an M8 Nylon Locknut (11). Do not tighten the Nylon Locknut yet. Attach the other Front Upright (43) to the Right Base (40) in the same manner. 3 42 42 1 15 53 1 11 1 21 40 43 15 1 15 1 21 43 1 15 1 4. Press a 50mm Square Inner Cap (21) into each end of the Crossbrace (47). Attach the Crossbrace (47) to the Lat Base (48) with two M8 x 68mm Bolts (1), two M8 Washers (15), and two M8 Nylon Locknuts (11). Do not tighten the Nylon Locknuts yet. Attach the Crossbrace (47) to both Weight Uprights (42) with four M8 x 68mm Bolts (1), four M8 Washers (15), and four M8 Nylon Locknuts (11). Do not tighten the Nylon Locknuts yet. 4 42 1 21 42 1 1 15 47 21 15 48 1 15 15 1 1 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
6
3.
Press a 50mm Square Inner Cap (21) into each
Front Upright (43).
Attach a Front Upright (43) to a Weight Upright (42)
with two M8 x 68mm Bolts (1), four M8 Washers
(15), and two M8 Nylon Locknuts (11).
Do not
tighten the Nylon Locknuts yet.
Attach the other Front Upright (43) to the other
Weight Upright (42) in the same manner.
Attach the Front Upright (43) to the Left Base (53)
with an M8 x 68mm Bolt (1), an M8 Washer (15),
and an M8 Nylon Locknut (11).
Do not tighten the
Nylon Locknut yet.
Attach the other Front Upright (43) to the Right
Base (40) in the same manner.
4.
Press a 50mm Square Inner Cap (21) into each end
of the Crossbrace (47).
Attach the Crossbrace (47) to the Lat Base (48)
with two M8 x 68mm Bolts (1), two M8 Washers
(15), and two M8 Nylon Locknuts (11).
Do not
tighten the Nylon Locknuts yet.
Attach the Crossbrace (47) to both Weight Uprights
(42) with four M8 x 68mm Bolts (1), four M8 Washers
(15), and four M8 Nylon Locknuts (11).
Do not
tighten the Nylon Locknuts yet.
3
4
21
21
43
43
1
1
1
11
1
1
1
15
15
15
42
42
42
42
21
21
47
48
1
1
1
1
15
15
15
1
15
1
1
15
40
53