Weider Pro 900 Bench English Manual - Page 10
Attach the Lat Bar 36 to the Cable Clip 33
View all Weider Pro 900 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
15. Secure the looped end of the Cable (34) to the 15 M19 x 19mm Bolt (46) in the bracket on the Weight Carriage (32) with an M10 Nylon Locknut (19). Next, slide the Carriage Stop (39) onto the Lat Tower (26). Secure the Carriage Stop with an M8 x 70mm Bolt (54) and an M8 Nylon Locknut (13). Note: The Carriage Stop must be positioned with the lip on top as shown. 16. Insert the Lat Tower (26) into the Lat Tower Base 16 (35). Make sure that the Lat Tower is turned as shown. Secure the Lat Tower with two M10 x 65mm Bolts (18), four M10 Washers (24), and two M10 Nylon Locknuts (19). 26 46 32 13 Lip 26 34 19 54 39 24 19 18 35 17. Attach the Lat Bar (36) to the Cable Clip (33) and place the Lat Bar in the lat bar rest on the Lat 17 Tower (26). 18. Make sure that all parts are properly tightened before you use the weight bench. The use of all remaining parts will be explained in USING THE WEIGHT BENCH on pages 11 and 12. 10 Lat Bar Rest 33 36 26