Weider Pro 900 Bench English Manual - Page 7
Leg Lever 4 to the Front Leg 8 with the Bolt
View all Weider Pro 900 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. Attach the Front Leg (8) to the Frame (2) with two M10 x 65mm Bolts (18), two M10 Washers (24), 3 and two M10 Nylon Locknuts (19). 19 24 18 8 2 19 4. Tap three 45mm Square Inner Caps (21) into Leg Lever (4) as shown. Tap a 1Ó Round Inner Cap (23) into the indicated end of the Weight Tube (52). Insert the Weight Tube (52) into the indicated hole in the Leg Lever (4). Press a 1Ó Angle Cap (50) onto the indicated end of the Weight Tube. Note: If you purchased the optional Olympic expansion kit, attach the Olympic sleeve to the Weight Tube (52) as shown in the accessory manual. 5. Lubricate an M10 x 72mm Bolt (53). Attach the Leg Lever (4) to the Front Leg (8) with the Bolt and an M10 Nylon Locknut (19). Attach the Narrow Spacer (30) to the Leg Lever (4) with the M8 x 58mm Bolt (49), two M8 Washers (48), and an M8 Nylon Locknut (13). Note: The Spacer will fit tightly inside of the Leg Lever. 4 21 23 5 4 49 48 30 21 4 52 50 21 19 8 53ÐLubricate 6. Attach the Frame (2) to the Lat Tower Base (35) 6 with two M10 x 67mm Bolts (14), two M10 Washers (24), and two M10 Nylon Locknuts (19). 48 13 19 35 14 24 2 7