Weslo 450t Stepper English Manual - Page 4
Assembly
View all Weslo 450t Stepper manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
ASSEMBLY Place all parts of the stepper in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench , a phillips screwdriver , two adjustable wrenches and a rubber mallet . PART CHART Use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 10. The second number refers to the quantity used in assembly. Note: If a part is not found in the parts bag, check to see if it has been preassembled. M10 Locknut (15)Ð8 Washer (25)Ð4 M6 x 12mm Button Head Bolt (21)Ð4 M10 x 65mm Hex Head Bolt (24)Ð4 M4 x 16mm Console Screw (22)Ð4 M4 x 10mm Screw (28)Ñ8 1. Press a Stabilizer Endcap (13) onto each end of the Long Stabilizer (8). 1 Attach the Long Stabilizer (8) to the indicated end of the Base (2) with two M10 x 65mm Hex Head Bolts (24), two Washers (25) and two M10 Locknuts (15). 13 8 25 24 15 2 15 25 13 4