Weslo 925 Instruction Manual - Page 4

BEFORE YOU BEGIN Thank you for selecting the WESLO¨ CADENCE 925 treadmill. The CADENCE 925 treadmill combines advanced technology with innovative design to let you enjoy an excellent form of cardiovascular exercise in the convenience and privacy of your home. And when youÕre not exercising, the unique CADENCE 925 can be folded up, requiring less than half the floor space of other treadmills. For your benefit, read this manual carefully before using the treadmill. If you have additional questions, please call our Customer Service Department at 0345-089009. To help us assist you, please note the product model number and serial number before calling. The model number of the treadmill is WETL92571. The serial number can be found on a decal attached to the treadmill (see the front cover of this manual for the location). Before reading further, please review the drawing below and familiarise yourself with the labelled parts. Towel Rack Accessory Tray Storage Latch Key/Clip Water Bottle Holder (Water Bottle is not included) Handrails Circuit Breaker Walking Belt Foot Rails LEFT SIDE Cushioned Walking Platform for maximum exercise comfort 4 Incline Leg BACK Rear Roller Adjustment Bolt b. If the walking belt has shifted to the right, first remove the b key and UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear roller adjustment bolt counterclock- wise, and the right bolt clockwise, 1/4 of a turn each. Be care- ful not to overtighten the walking belt. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centred. c. If the walking belt slips when walked on, first remove the c key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each side of the walking belt 2 to 3 inches off the walking platform. Be careful to keep the walking belt centred. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened. 6. SYMPTOM: THE TREADMILL SITS UNEVENLY ON THE FLOOR a. Make sure that the four leg pads are attached to the treadmill. (See assembly step 1 on page 5.) 7. SYMPTOM: THE INCLINE SYSTEM STICKS a. Raise the treadmill to the storage position. (See HOW TO FOLD THE TREADMILL FOR STORAGE on page 10.) Pivot the incline leg several times to break in the incline system. 13