Weslo Bench 400 Uk Manual - Page 7

3. Attach the Bench Frame (8) to the "H"-frame (5) with 3 two M8 x 52mm Bolts (6), two M8 Washers (23), and two M8 Nylon Locknuts (7). Do not tighten the Nylon Locknuts yet. 6 8 4. Attach the Bench Frame (8) to the Base (3) with an M8 x 55mm Bolt (38) and an M8 Nylon Locknut (7). 4 Tighten the Bolts and Locknuts used in steps 1 to 4. 8 23 7 23 5 6 3 7 5. Attach the Right Barbell Hook (14) to a Weight Rest (15) with an M8 Nylon Locknut (7). Attach the Left Barbell Hook (40) to the other Weight Rest (15) with an M8 Nylon Locknut (7). Press two Upright Bushings (48) onto the top of the "H"-frame (5). Insert a Weight Rest (15) into each of the uprights on the "H"-frame (5). Secure each Weight Rest with an Adjustment Clip (16). Make sure that the Weight Rests (15) are at the same height. 6. Insert a 25mm Square Inner Cap (17) into the top of the Leg Lever Tube (18). Press a Leg Lever Bushing (19) into the top of the front leg on the Bench Frame (8). Insert the Leg Lever Tube (18) into the front leg and secure it with the Large Adjustment Clip (20). 5 14 16 5 6 19 38 15 7 15 48 40 Upright 17 18 8 20 7 Front Leg