Weslo Cadence 21.0 Instruction Manual - Page 10
Lower the treadmill. See HOW TO LOWER
View all Weslo Cadence 21.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
8. Remove the Spring Clip (86) from the lower end of the Gas Spring (85). Press the lower end of the Gas Spring onto the Mount (92) on the bracket in the center of the Base (80). Note: It may be necessary to pivot the Frame (not shown) forward or backward slightly (see HOW TO LOWER THE TREADMILL FOR USE on page 17). See the inset drawing. Insert the Spring Clip (86) into the two indicated small holes in the Gas Spring (85). Rotate the Spring Clip until it clips onto the Gas Spring. Lower the treadmill. See HOW TO LOWER THE TREADMILL FOR USE on page 17. 8 85 86 80 92 Holes Bracket 85 86 80 Bracket 9. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys in a secure place. One of the hex keys is used to adjust the walking belt (see page 19 and page 20). To protect the floor or carpet, place a mat under the treadmill. 10