Weslo Cadence 21.0 Instruction Manual - Page 9

6. Attach the Latch Housing (72) to the left Upright (73) with two #10 x 1" Tek Screws (83); start 6 both Screws, and then tighten each of them.  Place the treadmill in the storage position (see HOW TO FOLD THE TREADMILL on page 17). 73 72 83 7. Identify the rod end of the Gas Spring (85). See the two small inset drawings. Locate the 7 Spring Clip (86) in the rod end of the Gas Spring. Using your fingernail or a screwdriver, press on the end of the Spring Clip to loosen it. Rotate the Spring Clip, and then pull the Spring Clip out of the Gas Spring. Avoid losing the Spring Clip. Extra Spring Clips are included. Next, press the rod end of the Gas Spring (85) as far as possible onto the Mount (92) on the bracket in the center of the Frame (50). See drawing 7a. Insert the Spring Clip (86) into the two indicated small holes in the rod end of 7a the Gas Spring (85). Then, rotate the Spring Clip until it clips onto the Gas Spring. 50 Bracket 86 Rod 85 86 86 92 86 Holes 50 85 9