Weslo Cadence 21.0 Instruction Manual - Page 8
If You Do Not Connect The Con
View all Weslo Cadence 21.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
3. Attach the Handrails (69) to the Uprights (73) with four M10 x 45mm Bolts (2). Start all four 3 Bolts, and then tighten each of them. 2 73 69 69 2 4. With the help of a second person, hold the console assembly near the Uprights (73). Remove 4 the tie from the Upright Wire (71). Connect the Upright Wire (71) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Insert the connectors and the excess wire into the crossbar on the Uprights (73). Console Assembly 71 Console Wire 73 Console Tie Wire 71 5. Attach the console assembly to the Uprights (73) and the Handrails (69) with five M4.2 x 19mm 5 Screws (3). Be careful not to pinch the wires. Console Assembly 73 3 69 3 69 3 8