Weslo Cadence 26.0 Instruction Manual - Page 7

1. Have a second person hold the Base (85) in the position shown. Identify the Right Upright (78), which has a square hole near the lower end. Orient the Right Upright (78) as shown, and attach it to the Base (85) with two 3/8" x 2 1/4" Bolts (8) and two 3/8" Star Washers (9); do not tighten the Bolts yet. Orient the Left Upright (77) as shown, and attach it to the Base (85) with two 3/8" x 2 1/4" Bolts (8) and two 3/8" Star Washers (9); do not tighten the Bolts yet. 1 Bracket 77 2. Attach a Wheel (84) to one side of the Base (85) with a 3/8" x 2 1/4" Bolt (8), two Wheel Spacers 2 (83), and a 3/8" Nut (13) as shown. Do not over- tighten the Bolt; the Wheel should turn freely. Attach the other Wheel (84) in the same way. Bracket 78 85 98 9 8 9 Square 9 8 Hole 84 83 83 8 13 84 85 3. Raise the Uprights (77, 78), and position the Base (85) near the treadmill as shown.  See the far right drawing. Tie the wire tie in the lower end of the Right Upright (78) around the Upright Wire (74). Then, pull the other end of the wire tie until the Upright Wire is routed through the Right Upright.  Make sure that the end of the Upright Wire (74) does not fall into the Right Upright (78).  3 74 Wire Tie 77 7 78 74 Wire Tie 85