Weslo Cadence 5.0 Treadmill Uk Manual - Page 8

5. Open part bag D. Place the Console Base (100) on the Right Handrail (6) and the Left Handrail (not shown). 5 Attach the Console Base with four 3/4" Screws (90) (only two Screws are shown). Do not tighten the Screws yet. Insert the Wire Harness (22) through the two indicated plastic ties on the Console Base (100). Next, insert the Wire Harness up through the opening beside the Wire Cover (86). Make sure that the Wire Cover is securely attached to the Console Base. See drawing 5a. Look at the top of the Console Base 90 (100). Insert the Wire Harness (22) through the plastic tie on top of the Console Base. 6. Press the Book Rack (85) onto the Console Base (100) in 6 the location shown. 100 22 86 Ties 6 5a 22 Tie 100 85 100 7. Hold the Console (1) near the Console Base (100). Touch the Right Handrail (6) to discharge any static. Find the connector on the end of the Wire Harness (22). Insert the connector into the red socket beneath the Console. The connector should slide easily into the socket and snap into place. If the connector does not slide easily and snap into place, turn the connector and then insert it. Make sure that the connector and wires appear as shown in drawing 7a. See drawing 5a. Insert the excess Wire Harness (22) down into the opening in the Console Base (100). Securely tighten the plastic tie on top of the Console Base to prevent the Wire Harness from slipping. Then, cut off the end of the plastic tie. 7 22 Ties 6 7a 1 100 22 8