Weslo Cadence 6.0 Treadmill English Manual - Page 7
Handrail 6 and the Frame. Attach the Right Handrail
View all Weslo Cadence 6.0 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2. Have a second person hold the Base (71) in the position shown. Identify the Right Handrail (6) which has a large hole near the lower end. Hold the Right Handrail (6) so that the bend is in the position shown. Insert two Handrail Bolts (12) into the bracket on the Right Handrail. Attach the Right Handrail to the Base (71) with the Handrail Bolts, two Handrail Washers (30), and two Nuts (17). Do not tighten the Nuts yet. Attach the Left Handrail (7) to the Base (71) in the same way. 2 30 12 7 17 Large 12 Hole 30 17 30 6 71 Bend 3. With the help of a second person, raise the Handrails 3 (6, 7) so the Base (71) is flat on the floor as shown. 7 Attach the Wheels (15) to the outer sides of the Base (71) with two Wheel Bolts (14) and two Wheel Nuts (83) as shown. Do not overtighten the Wheel Nuts; the Wheels should turn freely. Position the front of the treadmill Frame (55) between the Handrails (6, 7) as shown. Next, locate the long wire tie inside of the lower end of the Right Handrail (see the inset drawing). Tie the end of the wire tie securely to the end of the Wire Harness (22). Then, use the opposite end of the wire tie to pull the Wire Harness through the Right Handrail until the Wire Harness extends from the upper end of the Right Handrail. 6 Wire Tie 55 22 83 15 22 Wire Tie 14 71 6 4. Have a second person lift and hold the front end of the Frame (55). Hold a Frame Spacer (13) between the Right 4 Handrail (6) and the Frame. Attach the Right Handrail to the Frame with a Frame Bolt (10), a Handrail Washer (30), and a Handrail Star Washer (60). Repeat this step on the left side of the treadmill. 7 6 13 30 10 60 55