Weslo Cadence 620 User Guide - Page 7

HOW TO CHANGE THE INCLINE OF THE TREADMILL To vary the intensity of your exercise, the incline of the treadmill can be changed. There are two incline levels. Before changing the incline, remove the key and unplug the power cord. To change the incline, raise the back of the treadmill and rotate the incline leg until it rests against the treadmill frame as shown below. CAUTION: Before using the treadmill, make sure that the frame is resting on the incline leg. Lowest Incline Level Frame Incline Leg Highest Incline Level Frame Incline Leg OPERATION AND ADJUSTMENT THE PERFORMANT LUBETM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBETM, a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CORD This product must be earthed. If it should malfunction or break 1 down, earthing provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-earthing conductor and an earthing plug. Socket on treadmill Two power cords are included. Select the one that will fit your outlet. Refer to drawing 1, and plug the indicated end of the power cord into the socket on the treadmill. Refer to drawing 2. Plug the power cord into an appropriate outlet that is prop- erly installed and earthed in accordance with all local codes 2 and ordinances. Note: In Italy, an adaptor (not included) must be used between the power cord and the outlet. Important: The treadmill is not compatible with GFCI-equipped outlets. Outlet DANGER: Improper connection of the equipment-earthing conductor can result in an increased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly earthed. Do not modify the plug provided with the productÑif it will not fit the outlet, have a proper outlet installed by a qualified electrician. 10 7