Weslo Cadence 920 English Manual - Page 5
Assembly
View all Weslo Cadence 920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires two adjustable wrenches (not included). A phillips screwdriver (not included) may also be needed. 1. Attach six Base Pads (57) to the bottom of the Base (59) in the indicated locations. Note: One extra Base Pad may be included. 57 57 2. Firmly hold the left or right handrail as shown. Raise the 2 handrails until the Base (59) and the front Wheels (56) are resting on the floor. 59 57 56 59 3. Make sure that there is a Frame Guide (52) on the left side of the Frame (23). If there is not, attach the Frame Guide with two Screws (100) as shown. Note: Be careful not to overtighten the Screws. Make sure that the thick end of the Frame Guide is at the bottom. 3 s 100 52 Thick end 23 4. Next, the treadmill should be raised to the storage posi-\tion. Hold the treadmill with your hands in the locations 4 shown at the right. To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the treadmill, make sure to lift with your ( legs rather than your back. Raise the treadmill about halfway to the vertical position. 5