Weslo Cadence Af 5.1 Treadmill English Manual - Page 9
Attach the Latch Housing 48 to the Left Upright
View all Weslo Cadence Af 5.1 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
6. Start an M8 x 15mm Bolt (8) with an M8 Star 6 Washer (5) into each Upright (53, 54). Then, firmly tighten all six M8 x 15mm Bolts (8). 85 8 53 8 54 85 7. Attach the Latch Housing (48) to the Left Upright (53) with two M4.2 x 18mm Screws (58); start 7 both Screws, and then tighten them. 53 48 58 8. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys in a secure place. One of the hex keys is used to adjust the walking belt (see page 17). To protect the floor or carpet, place a mat under the treadmill. 9
9
6.
Start an M8 x 15mm Bolt (8) with an M8 Star
Washer (5) into each Upright (53, 54).
Then,
firmly tighten all six M8 x 15mm Bolts (8).
6
8
8
8
5
8
5
54
53
7.
Attach the Latch Housing (48) to the Left Upright
(53) with two M4.2 x 18mm Screws (58);
start
both Screws, and then tighten them.
58
48
53
7
8.
Make sure that all parts are properly tightened before you use the treadmill.
Keep the included hex keys
in a secure place. One of the hex keys is used to adjust the walking belt (see page 17). To protect the floor or
carpet, place a mat under the treadmill.