Weslo Cadence Lx15 English Manual - Page 6
Assembly
View all Weslo Cadence Lx15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included alien wrench and your own phillips screwdriver .6=O=) . 1. With the help of a second person, carefully lay the treadmill on its right side as shown (refer to the drawing 34 on page 5 to identify the right side). Insert one of the Extension Legs (41) into the treadmill as shown. Make sure that the Base Pad (36) is on the indicated side of the Extension Leg. Attach the Extension Leg with an Extension Leg Screw (34). 41 36 Attach the other Extension Leg (41) as described above. With the help of a second person, carefully raise the treadmill to the upright position so the Extension Legs (41) are resting flat on the floor. 41 34 2. Refer to HOW TO LOWER THE TREADMILL FOR USE on page 11. Follow the instructions in step 2 to lower the 2 treadmill. Attach the Storage Latch (12) to the left Upright (14) with two Latch Screws (13). Be careful not to overtighten the Latch Screws. 14 12 3. Remove the backing from the Adhesive Clip (74). Press the Adhesive Clip onto the base of the Uprights (14) in 3 the indicated location. Press the Allen Wrench (73) into the Adhesive Clip. 73 74 14 4. Make sure that all parts are tightened before you use the treadmill. To protect the floor or carpet, place 6 a mat under the treadmill.