Weslo Flex 505 English Manual - Page 6
Weightband
View all Weslo Flex 505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
8. Center a Foam Pad Tube (45) in the Ab Seat Leg (50). 8 Wet the ends of the Foam Pad Tube and the insides of two Foam Pads (46) with soapy water. Slide the Foam Pads onto the Foam Pad Tube. Attach the Ab Seat Leg (50) to the Ab Seat Rail (51) with two 7/16" x 2 1/4" Bolts (14), two 7/16" Washers (26), and two 7/16" Nylon Locknuts (7). Be sure that the Ab Seat Leg is turned so the weightband post is facing away from the Ab Seat Rail. 51 ' 50 7... : ' • .. Weightband Post 45 .• 46 1• 26 14 46 9. Attach the Ab Seat Rail (51) to the Bench Rail (10) with two 7/16" x 2 1/4" Bolts (14), two 7/16" Washers (26), and two 7/16'' Nylon Locknuts (7). 9 0 . . 14 6 • ' 51 • 10 7 . • . 10. Wet the end of the Ab Arm (52) and the inside of the Ab 10 _. Arm Pad (32) with soapy water. Slide the Ab Arm Pad onto the Ab Arm. Liberally lubricate the Ab Axle (54). Align the bracket on the Ab Arm (52) with the indicated hole in the Ab Seat Rail (51). Insert the Ab Axle through the bracket on the Ab Arm and the Ab Seat Rail. Be sure that the Ab Arm is turned as shown. Tap a 1/2" Dome Cap (18) onto each end of the Ab Axle. 32 ° 52 51 * ••• •54-• L.ub• .ric,.a..t.e.... 18 . 18 50 11. Attach the Ab Seat (47) to the Ab Seat Rail (51) with four 1/4" x 1/2" Bolts (8) and four 1/4" Washers (9). Do not tighten any of the Bolts until all four Bolts are inserted. 11 47 • ,- 9 51 . - - . ea, : • •' • c----- u 4-----8 9 ' 8 II