Weslo Momentum 750 English Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the elliptical crosstrainer in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included allen wrenches, assembly requires a phillips screwdriver , an adjustable wrench , and a rubber mallet . As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled. M6 Nylon Locknut (27)-4 M8 Nylon Locknut (38)-4 M10 Nylon Locknut (33)-6 M6 Washer (25)-4 M10 Split Washer (59)-2 M10 Washer (35)-2 M4 x 16mm Screw (42)-4 M6 x 54mm Flat Head Bolt (36)-4 M10 x 25mm Patch Screw (22)-2 M8 x 38mm Button Bolt (50)-4 Pedal Arm Bolt Set (40)-2 M10 x 66mm Button Bolt (48)-2 M10 x 75mm Carriage Bolt (34)-4 1. Identify the Front Stabilizer (10), which is narrower than the Rear Stabilizer (not shown). While another person lifts the front of the Frame (1), attach the Front Stabilizer to the Frame with two M10 x 75mm Carriage Bolts (34) and two M10 Nylon Locknuts (33). 1 34 10 5 1 33