Weslo Momentum G 3.4 Elliptical English Manual - Page 11

9. Orient an Upper Body Arm (41) as shown and slide it onto the right Upper Body Leg (44). Attach the Upper Body Arm (41) with two M8 x 40mm Bolts (60), two M8 Curved Washers (14) and two M8 Acorn Nuts (59); start both Bolts, and then tighten the Acorn Nuts. Attach the other Upper Body Arm (41) to the other Upper Body Leg (44) in the same way. 9 41 44 14 59 41 60 44 10. See drawing 10a. Identify the Right Pedal Arm (51) and orient it as shown. Next, apply grease to the Right Pedal Arm Axle (55). Insert the Right Pedal Arm Axle (55) into the right arm of the Crank (3), and firmly tighten the M17 Right Nut (52) clockwise onto it. Repeat this procedure to attach the Left Pedal Arm (46) with the M17 Left Nut (47). IMPORTANT: You must firmly tighten the Left Nut counterclockwise to attach it. See drawing 10b. Insert a Spacer (65) into the lower end of the right Upper Body Leg (44). Next, apply grease to an M8 x 55mm Bolt (61). Attach the right Upper Body Leg (44) to the Right Pedal Arm (51) with the M8 x 55mm Bolt (61), two M8 Washers (53), and an M8 Locknut (29). Attach the Left Pedal Arm (46) to the left Upper Body Leg (44) in the same way. 10a 47 52 3 55 Grease 10b 46 46 51 44 29 53 44 65 61 53 Grease 51 11