Weslo Momentum G 3.4 Elliptical English Manual - Page 8
Attach the Front Stabilizer 38 to the Frame 16
 |
View all Weslo Momentum G 3.4 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
3. Attach the Front Stabilizer (38) to the Frame (16) with two M8 x 65mm Carriage Bolts (57), two 3 M8 Curved Washers (14), and two M8 Acorn Nuts (59) (only one side is shown); start both Carriage Bolts, and then tighten the Acorn Nuts. 4. While a second person holds the Upright (32) near the Frame (16), connect the Upright Wire 4 (33) to the Reed Switch Wire (18). Next, push the Lower Resistance Cable (24) upward into the Upright (32), and then pull the end of the Lower Resistance Cable out of the indicated hole. 38 57 16 59 14 Hole 32 24 33 18 16 8
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
8
3
4
38
57
14
59
16
3.
Attach the Front Stabilizer (38) to the Frame (16)
with two M8 x 65mm Carriage Bolts (57), two
M8 Curved Washers (14), and two M8 Acorn
Nuts (59) (only one side is shown);
start both
Carriage Bolts, and then tighten the Acorn
Nuts.
4.
While a second person holds the Upright (32)
near the Frame (16), connect the Upright Wire
(33) to the Reed Switch Wire (18).
Next, push the Lower Resistance Cable (24)
upward into the Upright (32), and then pull the
end of the Lower Resistance Cable out of the
indicated hole.
32
24
18
16
33
Hole