Weslo Momentum G 3.4 Elliptical English Manual - Page 9

5. Insert the excess wire and cable into the Frame (16). 5 Tip: Avoid pinching the wire and the cable. Slide the Upright (32) onto the Frame (16). Attach the Upright (32) with four M8 x 16mm Screws (15) and four M8 Curved Washers (14); start all the Screws, and then tighten them. Avoid pinching the wire and the cable 32 15 14 15 16 15 14 15 6. Connect the Resistance Cable (34) to the Lower Resistance Cable (24) in the following way: See drawing A. Pull upward on the metal bracket (A) on the Lower Resistance Cable (24), and insert the tip of the Resistance Cable (34) into the wire clip inside the metal bracket. See drawing B. Firmly pull the Resistance Cable (34) upward and slide it into the top of the metal bracket (A). See drawing C. Using pliers, squeeze the prongs on the upper end of the metal bracket (A) together. Then, attach the Resistance Control (34) to the Upright (32) with an M5 x 14mm Screw (35). 6 A 34 B 34 C A Avoid pinching the cable A 35 24 34 24 A 32 9