Weslo Momentum G 3.8 Elliptical English Manual - Page 6
two M10 Locknuts 33.
View all Weslo Momentum G 3.8 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1. To make assembly easier, read the information on page 5 before you begin. Identify the Front Stabilizer (10), which is narrower than the Rear Stabilizer (not shown). While another person lifts the front of the Frame (1), attach the Front Stabilizer (10) to the Frame with two M10 x 75mm Carriage Bolts (34) and two M10 Locknuts (33). 1 34 10 33 1 33 2. While another person lifts the back of the Frame (1), attach the Rear Stabilizer (28) to the Frame 2 with two M10 x 75mm Carriage Bolts (34) and two M10 Locknuts (33). 33 1 3. The Console (23) requires four "AA" batteries 3 (not included); alkaline batteries are recom- mended. Remove the screw, remove the battery cover, and then insert four batteries into the bat- tery compartment. Make sure that the batteries are oriented as shown by the dia- gram inside the battery compartment. Then, reattach the battery cover. Screw Battery Cover 23 33 28 34 Batteries 6