Weslo Momentum G 3.8 Elliptical English Manual - Page 8
Attach the Left Handlebar 6 to the Upper Body
View all Weslo Momentum G 3.8 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
6. Attach the Water Bottle Holder (65) to the Upright (2) with two M4 x 16mm Screws (42). 6 65 2 42 7. Identify the Left Handlebar (6), which is marked with a "Left" sticker. Insert the Left Handlebar into one of the Upper Body Arms (5); make sure that the hexagonal holes are on the indicated side. Attach the Left Handlebar (6) to the Upper Body Arm (5) with two M6 x 38mm Button Bolts (50) and two M6 Locknuts (27). Make sure that the Locknuts are in the hexagonal holes. Do not fully tighten the Button Bolts yet. Apply a small amount of the included grease to the left axle on the Upright (2). Make sure that there are two Small Handlebar Bushings (49) in the Left Handlebar (6). Slide a Handlebar Spacer (47) and the Left Handlebar onto the left axle on the Upright (2) as shown. Make sure that the curved side of the Handlebar Spacer is facing the Upright. Then, tap an Axle Cap (14) onto the axle. Repeat this step with the Right Handlebar (8) and the other Upper Body Arm (5). 7 6 49 14 50 5 2 Grease 47 27 Hexagonal Holes 8 5 8