Weslo Pursuit 102 Uk Manual - Page 6
Note: The Flat Washers and Nylon Locknuts may
View all Weslo Pursuit 102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
5. Hold the Console (16) near the Handlebar (15). Connect the ground wire to the Handlebar with the 5 Ground Screw (27). Insert the console wire into the indicated hole in the Handlebar. Move the Console (16) toward the Handlebar (15), at the same time inserting the excess ground wire up into the hole in the underside of the Console. Continue until all of the excess ground wire is inside of the Console. Attach the Console to the Handlebar with four M5 x 12mm Screws (49). Be careful to avoid pinching the wires. Hole 16 Console Wire 27 Ground Wire 15 49 6. Whilst another person holds the Handlebar (15) near 6 the Upright (13), connect the console wire to the Upper Wire (36). Insert the excess wire down into the Upright. Attach the Handlebar to the Upright with three M8 x 15mm Button Screws (34), three M8 Split Washers (55) and three Curved Washers (42). Be careful to avoid pinching the wires. Be careful to avoid pinching 49 the wires. Be careful to avoid pinching the wires. 7. Attach the Seat (12) to the Seat Post (5) with three M8 Flat Washers (51) and three M8 Nylon Locknuts (10). Note: The Flat Washers and Nylon Locknuts may be preattached to the underside of the Seat. 34 55 42 34 7 15 Console Wire 36 34 55 42 13 12 5 51 10 51 10 6